Water Balance
Balancing your hot tub’s water
We all want safe crystal clear water to relax in. By keeping on top of the water balance you can make it a whole lot easier. It is not just the pH you need to look after, the Total Alkalinity needs to be checked as well. pH is a measure of how acidic or how alkaline the water is. The ideal level for a hot tub is between 7.2 and 7.6 which is slightly alkaline as this helps to protect the equipment along with making it comfortable for bathers. If your pH is high you must add pH minus to bring the level down and if your pH is low you need to add pH plus to raise the pH.
Water Balance pH Minus
£11.50 – £17.50
The ideal spa pH level is between 7.2 – 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle pH Minus is a granular acid used for lowering the pH if its above 7.6.
Water Balance pH Plus
£10.50 – £16.50
The ideal spa pH level is between 7.2 – 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle Spa pH Plus is a granular alkali used for raising the pH if it falls below 7.2.
Water Balance TA Plus 1kg
£11.50
AquaSparkle Spa T.A. Plus is a fine, rapid dissolving powder used for increasing the Total Alkalinity of your spa water. Apply when total alkalinity falls below 80mg/l (ppm) and then maintain the total alkalinity within the desired range of 80 – 150mg/l (ppm).
Hardness Plus 1kg
£11.50
AquaSPArkle Spa Hardness Plus is an effective product used for increasing calcium hardness levels within your spa water. Calcium hardness levels should be maintained within the recommended range of 100 – 200mg/l (ppm) to ensure that the spa and spa equipment is protected.